Passer au contenu principal

Comment restaurer une option de script manquante dans la règle Outlook?

Dans certaines versions d'Outlook, notamment dans les mises à jour récentes, l'option « Exécuter un script » peut être désactivée par défaut par mesure de sécurité. Pour activer l'option "Exécuter un script" dans Outlook, permettant la création de règles avec des scripts VBA, vous devrez généralement modifier des paramètres de registre spécifiques. Continuez à lire pour obtenir des instructions détaillées sur la façon de procéder.


Activer l'option "Exécuter un script" manquante dans Outlook

Pour restaurer les disparus exécuter un script option dans l'assistant de règles Outlook, assurez-vous d’abord qu’Outlook est fermé, puis procédez comme suit :

  1. Appuyez sur la touche Win + R clés ensemble pour ouvrir le Courir boite de dialogue. Dans cette boîte de dialogue, tapez regedit puis cliquez sur le OK .
  2. Dans le pop-out Contrôle de compte d'utilisateur boîte de dialogue, veuillez cliquer sur le Oui .
  3. Dans le Registre Editor fenêtre, accédez au chemin ci-dessous pour accéder au Sécurité réglage: HKEY_CURRENT_USER \ Software \ Microsoft \ Office \ 16.0 \ Outlook \ Sécurité
  4. Faites un clic droit sur l' Sécurité et sélectionnez Nouveauté > DWORD (32 bits).
  5. Nommez le DWORD créé comme ActiverUnsafeClientMailRules.
  6. Double-cliquez sur le ActiverUnsafeClientMailRules DWORD pour ouvrir le Editer la valeur DWORD (32-bit) boite de dialogue. Taper 1 dans l' Données de valeur boîte, et cliquez OK.
  7. Redémarrez votre Microsoft Outlook.

En suivant les étapes décrites ci-dessus, vous pourrez localiser et utiliser l'option « exécuter un script » lors de la création de règles dans Outlook.


Articles Relatifs


Meilleurs outils de productivité bureautique

Kutools for Outlook - Plus de 100 fonctionnalités puissantes pour booster votre Outlook

🤖 Assistant de messagerie IA: E-mails professionnels instantanés avec la magie de l'IA : un clic pour des réponses géniales, un ton parfait, une maîtrise multilingue. Transformez l’emailing sans effort ! ...

📧 Email Automation: Absent du bureau (disponible pour POP et IMAP)  /  Programmer l'envoi d'e-mails  /  Auto CC/BCC par règles lors de l'envoi d'un e-mail  /  Transfert automatique (règles avancées)   /  Ajouter un message d'accueil automatique   /  Divisez automatiquement les e-mails multi-destinataires en messages individuels 

(I.e. Email Management: Rappel facile des e-mails  /  Bloquer les e-mails frauduleux par sujets et autres  /  Supprimer les e-mails en double  /  Recherche Avancée  /  Consolider les dossiers 

(I.e. Pièces jointes ProSauvegarde par lots  /  Détachement par lots  /  Compression par lots  /  Enregistrement automatique   /  Détachement automatique  /  Compression automatique 

???? Magie de l'interface: 😊Plus d'émojis jolis et cool   /  Boostez votre productivité Outlook avec des vues à onglets  /  Réduire Outlook au lieu de fermer 

???? Merveilles en un clic: Répondre à tous avec les pièces jointes entrantes  /   E-mails anti-hameçonnage  /  🕘Afficher le fuseau horaire de l'expéditeur 

👩🏼‍🤝‍👩🏻 Contacts et calendrier: Ajouter par lots des contacts à partir des e-mails sélectionnés  /  Diviser un groupe de contacts en groupes individuels  /  Supprimer les rappels d'anniversaire 

infos Caractéristiques 100 Attendez votre exploration ! Cliquez ici pour en savoir plus.

 

 

Comments (26)
No ratings yet. Be the first to rate!
This comment was minimized by the moderator on the site
You switched from 32 bit to 64 bit without explanation. See "New > DWORD (32-BIT Value)" then after "6. In the Edit QWORD (64-BIT)". Which is it ? Or is it both?
This comment was minimized by the moderator on the site
Sorry for the confusion. It should be the DWORD (32-bit) Value. And I've fixed it in the tutorial. 🙂
This comment was minimized by the moderator on the site
You change from DWORD to QWORD at the end.
It should be DWORD
This comment was minimized by the moderator on the site
Thank you for bringing this to my attention. I've made the necessary correction in the tutorial.
This comment was minimized by the moderator on the site
Great! Thanks
This comment was minimized by the moderator on the site
This worked for me in Outlook for Office 365. Once point to clarify, the instructions flip-flop between DWORD and QWORD, which are mutually exclusive. I used DWORD and it worked.
This comment was minimized by the moderator on the site
I also didn't have a security folder. To get around the issue, I set a rule to forward all emails fitting a specific rule to IFTTT so I can use their automation instead. Won't work for everybody, and attachments get a long number added to them if saving to Dropbox.
This comment was minimized by the moderator on the site
what applet did you use on IFTTT, or did you make your own?
This comment was minimized by the moderator on the site
I set an email trigger, and set the action to be to save to Dropbox. However, I've since switched to Microsoft Flow for saving Gmail directly to Dropbox. My specific goal was to save Gmail attachments to Dropbox, and Flow worked best for that after IFTTT dropped support for reading emails from Gmail.
This comment was minimized by the moderator on the site
I Don't Have a security folder after HKEY_CURRENT_USER\Software\Microsoft\Office\16.0\Outlook
This comment was minimized by the moderator on the site
It's because Microsoft has yet again changed something concerning this feature. Most likely, this registry key path has completely changed, or has been outright omitted. I have a Premier Support ticket open with MS currently to have them provide us the CORRECT registry setting for Office2016/2019 current monthly channel to bring the Run a Script in Rules Actions back. It is completely unacceptable for MS to continue to alter/omit features like this without clear & priority notification to clients. I understand the security risks behind using such a feature, but in certain scenarios, this still is used.
This comment was minimized by the moderator on the site
By playing around I found the correct key:
Computer\HKEY_USERS\{whichevertheuserkeyis}\Software\Microsoft\Office\16.0\Outlook\Security

So do not use HKEY_Current_User, instead use HKEY_USERS
This comment was minimized by the moderator on the site
This doesn't seem to work for Outlook 2013. Is there a method that will work for this version? Also, your instructions reference DWORD and the images imply QWORD.
This comment was minimized by the moderator on the site
For 2013 I used HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Outlook\Security and DWORD EnableUnsafeClientMailRules with value 1.
Each version of office has its own folder in "HKEY_CURRENT_USER\Software\Microsoft\Office\"

You also need to allow the macro to run in outlook 2013:

File -> Options -> Trust Centre -> Trust centre settings
-> Macro settings -> "Notifications for all macros"

This will ask you to allow the macro the first time the rule runs, but be careful not to allow any other unknown macros during day to day use. You could also use a digitally signed macro, and only allow digitally signed ones to run.

Then create your script, create a rule that runs it, and you should be set.
This comment was minimized by the moderator on the site
Did not work for me.  I have Outlook 2013, but maybe now that Office 365 has overstepped this setting somehow.  I have the trust settings enabled to notify for all Macros.
This comment was minimized by the moderator on the site
DWORD or QWORD? A bit confusing to understand which to use... Had to create DWORD to make it work. Thanks
This comment was minimized by the moderator on the site
Do You have instructions how to enable this option also for outlook 2010?
This comment was minimized by the moderator on the site
Thank You! It worked for me and as mentioned in one of the comments below, Step 6 was DWORD dialogue box for me.
There are no comments posted here yet
Load More
Please leave your comments in English
Posting as Guest
×
Rate this post:
0   Characters
Suggested Locations